Description
The 4ms Row Power 45 is a clean, regulated and protected power solution for Eurorack systems. It is designed to supply enough power for two or three typical Eurorack rows, up to approximately 312 HP, keeping your modules running efficiently and reliably.
Key Features
- Power capacity of +12 V at 2.0 A maximum (1.5 A recommended), -12 V at 1.4 A maximum (1.2 A recommended) and +5 V at 1.5 A maximum (1.2 A recommended)
- Simple setup: plug a universal 15 to 20 V DC laptop-style power supply into one of the barrel jacks on the 4 HP panel
- Connect modules with flying bus cables or the 4ms Bus Stick, or use the solder holes for heavy gauge wire or MTA156 connectors in custom power systems
- Two power jacks for chaining multiple Row Power units from one power brick, which can typically power 3 to 5 rows or Pods
- Can be chained to 4ms Pod enclosures
- Each supply is independently regulated and protected to minimize interference between rows or Pods
- On/off switch cuts power without interrupting the chain
- Efficient operation that does not heat up your system, and skiff-friendly at only 27 mm deep with power connectors installed
What’s Included
- Two M3 Knurlie screws
- CV/Gate headers for expansion






